SingaporeSG
ChinaCN
MalaysiaMY
IndonesiaID
MyanmarMM
Brands
LINSEIS
STA PT 1600 - Simultaneous Thermal Analyzer
The STA PT1600 is the high end Simultaneous Thermobalance from LINSEIS. The system offers unparalleled TG and DSC resolution in combination with the highest vacuum capabilities and TG drift stability. The system is modular with ma...
DIL L75 Laser - Highest Precision Laser-Dilatometer
Unmatched resolution and absolute accuracy is now possible due to the development of the Linseis Laser-Dilatometer of the Pico-series. As the name indicates already the resolution goes up to Picometers (0,3 nm = 300 Picometer). Th...
TF - LFA Laser Flash for thin films
Thermal Conductivity / Diffusivity measurements for thin films
TFA – Thin Film Analyzer
Physical properties measurement of thin films
TEG - Tester - Thermoelectric Generator and Peltier-Element Tester
The Linseis TEG Tester is a measurement system for temperature dependent conversion efficiency evaluations for thermoelectric generators (TEGs).
LSR-3 - Seebeck Coefficient and Electric Resistivity
Most advanced Seebeck Coefficient and Electric Resistivity (LSR) characterization of Bulk material and Thin-Films
HCS 1/ 10/ 100 – Hall Effect Measurement System
The HCS System permits the characterization of semiconductor devices, it measures: mobility, resistivity, charge carrier concentration and Hall coefficient
GSA PT 10 - Gravimetric Sorption Analyzer
The GSA PT 10 line is based on the standard linseis microbalance design. This ultra sensitive microbalance is available in two version 0,1 / 1ug for 5 / 25 / 35 g sample weight. A number of environmental chambers are available for...
GSA PT 100 - High Pressure Sorption Measurements
At the heart of the Linseis GSA PT 100 Series is our unique Magnetic Weighing Balance which features a very aggressive gas reaction chamber as the weighing chamber is decoupled in this variant. There is a large selection of reacto...
GSA PT 1000 - High End Pressure Sorption Measurements
The GSA PT 1000 line is based on the well proven linseis microbalance design. This ultra sensitive microbalance is available in two version 0,1 / 1 ug for 5 / 25 g sample weight.
TMA PT 1000 - Thermomechanical Analyzer
The design of the LINSEIS TMA PT1000 Thermomechanical Analyzer guarantees highest precision, reproducibility and accuracy. The system was constructed to perform a variety of Thermomechanical experiments on an array of sample shape...
TMA PT 1600 - Vertical Thermomechanical Analyzer
The design of the TMA PT 1600 Thermomechanical Analyzer guarantees highest precision, reproducibility and accuracy. The system was constructed to performing a variety of Thermomechanical experiments, on an array of sample shapes a...
DTA PT 1600 - High temperature Differential Thermal Analysis
The Differential Thermal Analysis is the most common thermal analysis method due to its wide range of information provided. The Linseis high temperature DTA PT 1600 is designed to deliver highest calorimetric sensitivity, short ti...
DEA - Dielectric Analyzer
Dielectric cure monitoring measures electrical properties to determine the cure state and viscosity of thermoset materials, at the same time providing insight into chemistry, reaction rate, formulation and physical parameters.
EGA–FTIR (EGA Gas Analysis / Couplings)
The combination of a Linseis Thermal Analyzer with a FTIR is especially interesting in fields such as polymers, chemical and pharmaceutical industry. For interpretation different libraries are available.
EGA-QMS - Evolved Gas Analysis
The QMS – quadrupole mass spectrometer coupling device is a state of the art mass spectrometer with a heated inlet system. The QMS is used for the analysis of volatile decompositions.
EGA-GCMS - Gas Chromatography with Mass spectrometer coupling
By coupling a TGA or a STA with a (GC-MS) Gas chromatography–mass spectrometry which is an analytical method that combines the features of gas-chromatography and mass spectrometry, one can combine the strength on these two tools...
DIL L78 QDT / RITA - Quenching Dilatometer and Deformation Dilatometer
The Quenching and Deformation Dilatometer L78 QDT is especially suitable for the determination of TTT, CHT and CCT diagrams. The special induction furnace enables heating and cooling speeds in excess of 4000 K/s. The system compli...
DIL L75 HP High Pressure Dilatometer
The Linseis high pressure dilatometer DIL L75 HP enables completely new applications in thermal analysis. The system can measure expansions (length changes) in the temperature range from RT up to 1100/1400/1800°C and in the press...
DSC PT 1000
DSC PT 1000 was developed to provide a general purpose TM – DSC with a broad temperature range (-180 – 600°C) for all common applications. Furthermore emphasis was placed on an extremely stable baseline and high reproducibili...
DSC PT 1600
The LINSEIS high temperature DSC PT 1600 (HDSC/DTA) is designed to deliver highest calorimetric sensitivity, short time constants and a condensation free sample chamber.
STA PT 1000 - STA (TG-DSC/DTA) Thermogravimetric Analyzer
The STA PT 1000 is dedicated to analysis of organic materials in a relatively low temperature range up to 1000°C. The TG-DSC is a top loading Thermobalance, which offers a highly user-friendly design. Even at a sample weight of u...
High Pressure STA HP 1/2
The LINSEIS High Pressure STA ( High pressure Tg-DSC) delivers unsurpassed performance. The system can be used to determine simultaneous changes of mass (TG) and caloric reactions (HDSC) under defined atmosphere and high pressure ...
_vfhqwqum.jpg)
STA HP 3 (high pressure TG-DSC) - Table version
Linseis introduced the all new STA HP 3 (TGA+DSC) table top high pressure thermogravimetric, simultaneous thermal analysis instrument. The STA HP 3 is the result of 25 years of experience thermal analysis under high pressure. The ...
STA MSB PT 1 - Magnetic Suspension Balance
With the magnetic suspension balance LINSEIS MSB PT 1, gravimetric measurements in a wide temperature and pressure range and under aggressive media can be done. The contact-less transmission of the sample weight is realized with a...
TGA PT 1000 - Cost effective Thermobalance
The Linseis TGA PT1000 for thermogravimetric applications is a toploading Thermobalance, which offers a highly userfriendly design. Even at a sample weight of up to 5g the tara is done electronically.
TGA PT 1600 - High End Thermobalance
The Linseis TGA PT 1600 for thermogravimetric applications is a toploading Thermobalance, which offers a highly userfriendly design.
TGA MSB PT 1 - Magnetic Suspension Balance
With the magnetic suspension balance LINSEIS MSB PT 1, gravimetric measurements in a wide temperature and pressure range and under aggressive media can be done.
THB - Transient Hot Bridge - Basic, Advance, Ultimate
Transient Hot Bridge (THB) simultaneously delivers the three material properties thermal conductivity, thermal diffusivity and specific heat after just a few minutes, regardless of whether you have placed the corresponding sensors...
LFA 500 Light Flash
The Linseis LFA 500 Light Flash offer a versatile tool to measure the Thermal Diffusivity, Thermal Conductivity and Specific Heat Values for up to 18 Samples at the same time.
Page 1 of 2 (46 products)
