Dual syringe infuse/withdraw optimized for low flow with program options for 2 programs. 50 steps each. Accommodates syringes 0.5 µl to 10 ml. User definable flow rates with selectable target volume or time values to control the total infusion volume.
Features
Holds one or two syringes from 0.5 µl to 10 ml
High resolution color touch screen
Unparalleled ease of use
Touch pad "lock" feature
LED light on front panel
Full metal chassis
Built in syringe table
Up to 30 lb linear force
Advanced microstepping techniques
Built in RS485 interface
USB port
I/O & TTL interface
Continuous mode of operation
Spill dam
Programmable
Specifications
Accuracy
±0.35%
Syringes (Min/Max)
0.5 µl to 10 ml
Flow Rate
Minimum (0.5 µl syringe): 0.58 pl/min
Maximum (10 ml syringe): 11.70 ml/min
Display
4.3 WQVGA TFT Color Display with Touchpad
Non-Volatile Memory
Stores all Settings
Connectors
RS485 - IEEE-1394 6 pos
USB - Type B
I/O & TTL - 15 pin D-Sub Connector
Linear Force (Max)
13.6 kg (30 lb) @ 100% Force Selection
Drive Motor
0.9 Stepper Motor
Motor Drive Control
Microprocessor with 1/16 microstepping
Number of Microsteps
per one rev.of Lead Screw
20,480
Step Revolution
0.031 µm/ustep
Step Rate - Minimum
27.5 sec/µstep
Step Rate - Maximum
26 µsec/µstep
Pusher Travel Rate - Minimum
0.02 µm/min
Pusher Travel Rate - Maximum
71.55 mm/min
Power
100-240 VAC: 50/60 Hz, 50 W, 0.5 A fuse
Dimensions
22.6 x 19.05 x 15 cm (9 x 7.5 x 5 in)
Weight
2.66 kg (5.9 lb)
Operating Temperature
4 degree C to 40 degree C (40 degree F to 104 degree F)
Storage Temperature
-10 degree C to 70 degree C (14 degree F to 158 degree F)