SingaporeSG
ChinaCN
MalaysiaMY
IndonesiaID
MyanmarMM
Analytical Science
AOTF-NIR Spectrometer (In-line Process)
Luminar 4030 Free Space AOTF-NIR Spectrometer
Luminar 4030 is designed and built for in-line or at-line measurement in a production facility. The 4030 has a stainless-steel housing and is used in free space mode.
Brand: Brimrose
Not Available
Free delivery within Singapore only
The Brimrose Luminar 4030 AOTF-NIR Spectrometer is designed and built for in-line or at-line measurement in a production facility. The 4030 has a stainless-steel housing and is used in free space mode. The free space configuration is mounted to a blender, pipe, or over a conveyor at a fixed distance from the product so that the transmitted light reflects from the sample for optimal analysis.
Applications
- Blend Control: Real-time homogeneity monitoring and blending control process
- Drying Process: Direct placement on spray or fluid bed dryers
- Pharmaceutical: 100 percent inspection of solids, gels, liquids and powders
- Agricultural/Food: On-line food analysis for fat, protein, bread crumb, moisture, starch, etc.
- Polymer: In-site measurement of pellets, films and coatings
- Textile: Cotton/polyester ratio accurately by the web
- Pulp and paper: In-line thickness and coating analysis
- Tobacco: Measurements of moisture, nicotine, sugar, potassium, etc.
Technical Specification
| Spectral Range Options | 850-1700 nm, 900-1800 nm, 1100-2300 nm (standard) |
| Measurement Modes | Diffuse Reflection |
| Spectral Resolution | 2-10 nm |
| Wavelength Accuracy | ± 0.5 nm |
| Wavelength Repeatability | ± 0.01 nm |
| Wavelength Increment | Software Selectable 1-10 nm |
| Ambient Light Rejection | > 106 |
| S/N at 70% Range | < 30μabs in reflectance and transmission, for<5 seconds integration time |
| Wavelength Access Time | < 66 μsec |
| Photometric Range | 3.5 AU |
| Linearity | Better than 0.15% |
| Signal Digitalization | 16-bit A/D (1 part in 65,536) |
| Sampling Speed | 16,000 wavelength/sec |
| Sampling Distance | 40 mm (or 65 mm with Ø10 mm Sample Area) |
| Diagnostic | 10 Built-in monitoring sensors |
| Power Requirements | 12VDC, (24VDC special order), 90Watts, 110VAC 60Hz, 220VAC 50Hz |
| Cooling Options | Fan-cooled, Vortex-cooled |
| Communication | Wireless, OPC UA, Modbus (Serial or TCP), I/O with 4-20mA, TCP/IP Ethernet |
| Enclosure (W x H x D) | 300 mm x 256 mm x 145 mm Stainless Steel NEMA 4X; Explosion-proof options available |
Specification :
| Specifications | Kindly refer to the "Overview" tab. |
No publications found...